Tooth Discoloration and Solubility of Zinc Oxide Eugenol Combined with Different Concentrations of Nano-Curcumin: An in vitro Study.

Statement of the Problem: Due to the unfavorable properties of eugenol, the eugenol content can be reduced to improve the properties of zinc oxide eugenol (ZOE) by making a new combination of nanocurcumin called curcumin pulpal paste (CPP). Purpose: The aim of this in vitro study was to evaluate the solubility and tooth discoloration of three concentrations of CPP compared to ZOE, and Metapex. Materials and Method: In this in vitro study for evaluating of the solubility, five groups including ZOE, Metapex, and three concentrations of CPP (5%, 10%, and 20%) were tested. For evaluating the solubility, the changes in of the weight of samples were measured at 1, 3, 7 and 30 days after initial setting. In order to evaluate the tooth discoloration, 75 bovine maxillary anterior teeth were filled with one of five pulpal pastes. The changes in tooth color were evaluated at 1 hour, 1 week, 1 and 3 months after material placement. Results: The solubility increased by increasing the nano-curcumin percentage in CPPs. After 30 days, the solubility of the 5%CPP, and ZOE was not significantly different (p= 1.000). According to the colorimetric test, after 3 months, the highest discoloration was recorded for 20% CPP (8.45), and the smallest discoloration was registered for Metapex (4.06). The discoloration of 5% CPP, and 10% CPP was similar to ZOE's color change (p> 0.05). Conclusion: The results of the present study showed that the solubility of pulpal paste has increased with increasing curcumin concentrations. Therefore, pulpal paste with different nanocurcumin concentrations can be used considering the patient's age and the desired time of deciduous tooth loss, and dissolution of pulpal paste. Concerning the discoloration after 3 months, Metapex was the best material and the most discoloration rate was related to 20% CPP, and there was no difference between the 5% CPP, and 10% CPP with ZOE.

Comparison of the Efficacy of Jilo Animation Approach versus Conventional Tell-Show-Do (TSD) Technique on Cooperation and Anxiety Levels of Children during Dental Practice: A Randomized Controlled Clinical Trials.

STATEMENT OF THE PROBLEM: Modeling is one of the non-pharmacological approaches to manage anxiety behavior and encourage children's cooperation in dentistry. This method is based on social learning theory in which the children learn the skills of overcoming anxiety and adapting their skills and behaviors during dental treatment. PURPOSE: The aim of this study was to evaluate the effect of an animated-movie modeling approach, named Jilo, on cooperation and anxiety of children in comparison with the conventional Tell-Show-Do (TSD) method in a dental setting. MATERIALS AND METHOD: In this randomized controlled trial, 50 healthy children (aged 4-6) with no history of dental treatment were recruited and randomly allocated to experimental (n= 24) and control (n= 24) groups. During the first visit, the experimental group watched the Jilo animated movie. After a 30-minute break, they received prophylaxis followed by fluoride therapy. The control group received the conventional TSD technique and then underwent prophylaxis and fluoride therapy. One week later, a dental restoration, which required mandibular nerve block anesthesia, was performed for both groups. The cooperation and anxiety levels of patients were evaluated during two visits using Venham Clinical Cooperation Scale (VCCS) and Venham Clinical Anxiety Scale (VCAS). RESULTS: The mean VCAS in the experimental group was significantly lower compared to the control group during the first and second visits (p= 0.008 and p= 0.044, respectively). The mean VCCS was also significantly lower in the experimental group during the first (p= 0.015) and second visits (p= 0.019) compared to the control group. CONCLUSION: The application of animated-movie modeling (Jilo) can be recommended as an effective method for preparation of children before the dental treatment session.

Effect of the Time of Salivary Contamination during Light Curing on Degree of Conversion and Microhardness of a Restorative Composite Resin.

Saliva contamination is a major clinical problem in restorative procedures. The purpose of this study was to evaluate the effect of the time of salivary contamination during light curing on the degree of conversion and the microhardness of a restorative composite resin. Eight groups of 10 samples for measuring the microhardness and eight groups of 5 samples for evaluating the degree of conversion were prepared. The samples of each group were contaminated with human saliva at a certain time. The first group (T0) was contaminated before light curing. The specimens in groups T2-T30 were contaminated at 2, 5, 10, 15, 20 and 30 s after the start of light curing, respectively. The samples of group T40 were contaminated after light curing. The degree of conversion and the microhardness of the specimens were measured by Fourier transform infrared (FTIR) spectroscopy and Vickers hardness testing techniques, respectively. The results of this study revealed that there were no significant differences between the groups in terms of the degree of conversion of the composite resin. Consistent with the findings for the degree of conversion, significant differences in the microhardness between the groups were not found. In conclusion, from a clinical point of view, the results of our study showed that the time of salivary contamination (before, during or after light curing of composite resin) has no significant effect on the polymerization (degree of conversion) and one of the important mechanical properties of dental composite resins (microhardness).

Clinical and Radiographic Success of Electrosurgical Pulpectomy in Primary Teeth.

A pulpectomy requires the swift extraction of the inflamed tissue. Moreover, the speed of treatment is especially important in the case of uncooperative children. Conventional pulpectomies, however, often require an extended treatment period, which can therefore cause problems with such patients. Electrosurgical methods have been applied to pulpotomies for a number of years. However, to the best of our knowledge, no studies to date have assessed its application to pulpectomies. The aim of this study was to compare clinical and radiographic success rates over a 6-month follow-up period between conventional and electrosurgical pulpectomies. A total of 50 children aged 4 to 8 years were enrolled in this randomized clinical trial. A pulpectomy of the first and second primary molar teeth was seen as the optimal treatment plan in all these patients. One group was treated using the conventional method (C group, 25 teeth) and the other with electrosurgery (ES group, 25 teeth). The patients were evaluated for the presence of pain, mobility, abscess, sinus tract, erythema, tenderness to percussion, internal and external root resorption, and radiolucency. Clinical and radiographic success rates and total working time were assessed. The Fisher's exact test and Mann-Whitney U-test were used for the statistical analysis. After 6 months of follow-up, the clinical and radiographic success rates were 90.5 and 85.7%, respectively, in the ES group, compared with 88.9 and 72.2%, respectively, in the C group. No statistically significant difference was observed between the two groups (p>0.05). Working time, however, was significantly shorter in the ES group (p<0.001). This suggests that pulpectomy with electrosurgery reduces treatment time, and is therefore quite useful in situations where duration of the treatment course is of crucial concern.

Additive and reducing Effects between Calcium Hydroxide and Current Irrigation Solutions.

INTRODUCTION: Microorganisms should be considered to have the major role in starting and perpetuation of pulpo-periapical diseases. Using intracanal medicaments is necessary to gain a bacteria-free environment in the canal system. Calcium hydroxide (abbreviated as Ca(OH)2), which is the most commonly used medicament in endodontic therapy, has been shown to be effective against primary sources of infection; however, its effectiveness against some microorganisms, such as Candida albicans and Enterococcus faecalis has not been proved. On the other hand, sodium hypochlorite (NaOCl), chlorhexidine (CHX), and iodine potassium iodide (IKI) have been shown to be the potent medicaments against these microorganisms. Because of this fact, combination of Ca(OH)2 and some irrigants of the root canal has been suggested as potential intracanal medicaments. The aim of this literature review is to identify and address the efficacy of Ca(OH)2 in combined with some of these irrigating solutions.

Laser-based Disinfection of the Root Canal System: An Update.

INTRODUCTION: Microorganisms have been considered to have played a critical role in the initiation and development of pulpo-periapical diseases. Some evidences have shown that mechanical instrumentation may leave considerable portions of canal surfaces undebrided. Therefore, some supplemental methods, such as the use of chemical solutions and/or lasers, have been introduced to further disinfect the complicated canal anatomy and destroy as many microorganisms as possible. The purpose of this review was to address a brief review of characteristics of lasers and their effects to disinfect the root canal in endodontics.

Evaluation of the effect of using electrosurgery in pulpectomy of deciduous teeth on succedaneous teeth: an animal study.

OBJECTIVES: The aim of this study was to determine the probable side effects of electrosurgery in pulpectomy of deciduous teeth on succedaneous teeth in dogs. MATERIALS AND METHODS: In this animal study, all maxillary and mandibular teeth at one side of five puppies' mouths were treated employing electrosurgical pulpectomy and were then compared with those of the other side treated using the conventional method. The electrosurgical dental electrode was placed in canals to the point of working length for the experimental group. After pulpectomy, the canals were filled with zinc oxide eugenol paste and the access cavity was restored with amalgam. The dogs remained under care until their successor teeth erupted and clinical examination was performed. RESULTS: The teeth treated employing electrosurgical pulpectomy presented natural appearance with no observable defects including enamel hypoplasia, diffuse opacities of enamel, demarcated opacities, and enamel discoloration. CONCLUSION: Electrosurgical pulpectomy can be considered as an option for pulpectomy of deciduous teeth.

Natural model training, an alternative way to enhance learning in pediatric dentistry.

OBJECTIVE: Educational teaching of the diagnosis of resorbed root for pulpectomy in deciduous teeth radiography has always been a big challenge in pediatric dentistry. The purpose of the study was to propose a new practical methodology to improve the quality of learning in students of dentistry. MATERIALS AND METHODS: Extracted deciduous teeth were molded in the transparent epoxy resin as their real position in the jawbone. Then, their own pre-extraction radiographs were attached to them. Forty dental students were randomly allocated to the control group of conventional teaching and experimental group of natural model training. All participants were attended in a validated exam and the data were analyzed. A questionnaire was designed with an answer choice in Lickert scale to measure the students' attitude towards the new method and finally the data were reported with descriptive statistics. RESULTS: The mean of the learning degree in the experimental group was graded 9.2± 3.2 and was significantly higher than 5.8± 1.1 which belongs to the participants of the conventional method as control (p= 0.04 <0.05). CONCLUSION: Considering the limitation of this study, using natural models in radiography training will improve the diagnostic competency and the student's educational satisfaction in pediatric dentistry.